![]() ![]() Available with heat shrink ratios up to 1.4:1 and with expanded inside diameters (ID) up to 2.0' (50.8mm). Consistent shrink ratios of 1.2:1 and above. PEEKshrink® Tubing Features & Benefits: Shrink temperature 625☏/329☌ - 725☏/385☌. The sliding behavior always depends on the overall sliding system, and on parameters like sliding partner, load, sliding speed, surface roughness, temperature and so on. FEATURES AND BENEFITS of PEEKshrink® Tubing. The fillers carbon fiber and graphite make TECAPEEK PVX black a superior bearing grade with improved thermal conductivity. ![]() The better the thermal conductivity of the part, the faster the heat is dissipated and overheating can be reduced. In order to avoid thermal overload of a bearing, the resulting frictional heat should be dissipated as quickly as possible from the sliding surface of the bearing. Because of these excellent sliding characteristics, they are used in gears, bearings, sliding bearings, and many other applications. PEEK is used where conventional materials (POM, PA / Nylon etc.) would be beyond their limits. With this combination of criteria, this bearing grade material can be used in harsh environments of 100 to 300 ☌. ![]() It offers hydrolysis resistance to steam, water, and sea water. Improved heat dissipation (reduced frictional heat) PEEK (polyetheretherketone) is a high-performance engineering plastic with outstanding resistance to harsh chemicals, and excellent mechanical strength and dimensional stability. Product : PEEK Raw Material Price virgin/modified /CF30/ LCF30 Brand: JULIER special engineering PEEK Color : Natural,Black,Blue etc,Custom made PEEK granules. ![]() Still, many applications call for special PEEK bearing grades as TECAPEEK PVX black, containing a multiple filler system (graphite, carbon fiber and PTFE), to fulfill a combination of requirements: Unfilled PEEK natural is the most balanced material in high temperature environments, where non-lubricated sliding and non-contamination is required. machine Machining, fused filament fabrication, 3D printing and injection molding for fabrication of desired geometries in organic and aqueous environments, PEEK material available in rod, compressor plate valve, filament and pellet form for machining, 3D printing and injection molding, is a colorless organic thermoplastic polymer with mechanical and chemical properties suitable for a wide range of engineering applications.PEEK bearing materials with excellent heat resistance and durability Why PEEK PEEK is short for polyether ether ketone, which doesn’t make sense to many other than those with a strong chemistry background. PEEK polymer has chemical resistance as well as physical properties, tensile strength, dimensional stability, and therefore mechanical properties provide high temperature performance, one of the reasons behind the widespread use of PEEK in engineering applications is the availability of multiple options and processing conditions, i.e. Today Solvay is the only US-based producer of PEEK resin. Granular PEEK from different manufacturers requires slightly different drying procedures, but usually 3 to 4 hours at 150 ☌ to 160 ☌ is sufficient, standard injection molding machines can be used for injection molding of PEEK material or mold peek, Because these machines can reach heating temperatures of 350 ☌ to 400 ☌, this is sufficient for almost all PEEK grades. Solutions in Plastic supply PEEK Polyetheretherketone which is a unique high performance engineering plastic which offers excellent mechanical strength. PEEK material is in granular form and is used for injection and compression molding. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |